zerogreen® Green Growth Remover Turbo - FAQ

frequently asked Questions

1. How is the zerogreen® Green Growth Remover Turbo used?
Our product is easy to use. All you need is suitable protective clothing to protect yourself from splashes and aerosols. The concentrate can be poured into a clean tool and diluted up to 1:10 depending on the degree of dirt. Spray the area to be cleaned generously with the solution and allow it to take effect for at least 30 minutes. Then rinse the area thoroughly with water.
2. On which surfaces can the zerogreen® Green Growth Remover Turbo be used?
Our product is versatile. It can be used on concrete, natural stone, plaster, wood, plastic and many other surfaces. Application to raw metals or other sensitive surfaces is not recommended as this can cause corrosion. A test should always be carried out on an inconspicuous area to test the material for compatibility.
3. Can the zerogreen® Green Growth Remover Turbo be harmful to plants or animals?
Our Turbo green algae remover is powerful and should not be used directly on plants or living creatures. Please handle the product carefully and follow the instructions on the label. After the product has taken effect or the product has been neutralized, animals can enter the area again without restrictions.
4. How much product do I need for my area?
Our Turbo green algae remover is highly concentrated and can be diluted up to 1:10. Therefore, a small amount is enough to clean a large area of ​​up to 110m². The actual consumption depends on the desired mixing ratio. For further help, use our consumption calculator.
5. How quickly does the zerogreen® Green Growth Remover Turbo work?
The effectiveness of the zerogreen® Green Growth Remover Turbo can be seen immediately after application. However, for more stubborn stains or dirt, it may take longer and a repeat of the process or a longer exposure time may be necessary. The effect can also be increased by brushing.
6. Can the zerogreen® Green Growth Remover Turbo damage surfaces?
Our product is designed to effectively remove dirt without damaging surfaces. However, we always recommend testing an inconspicuous area before applying it to a large area, as there are materials that are not suitable for treatment with zerogreen®. For example, raw metals.
7. Can I use the zerogreen® Green Growth Remover Turbo in rainy weather?
For optimal results, we recommend applying the product in dry weather. The best time to use the green algae remover is between +5 degrees and +25 degrees Celsius.
8. When should I use zerogreen® Green Growth Remover Turbo?
Our Turbo green growth remover can be used whenever green growth, algae, fungi, etc. need to be removed quickly. The temperature during processing should not fall below +5 degrees Celsius. The optimal time of year for use is spring or autumn. However, it can generally be used all year round, provided the conditions are right.
9. Can I mix the zerogreen® Green Growth Remover Turbo with other cleaning products?
Our green algae remover should never be mixed with other cleaning agents, as this could release toxic gases. Be particularly careful with acids. Always make sure your tools are clean.
10. How long will my surface stay clean?
This depends on many factors such as the environment, the surface, weather conditions, etc. As a rule, it can be said that surfaces stay clean for between 6-12 months before green growth forms again. The zerogreen® Green Growth Remover Turbo can be used prophylactically every six months to break down green growth as it forms. Alternatively, our zerogreen® Green Growth Remover with long-term protection can be used, which has a longer shelf life. This should be used prophylactically once a year. Please note that the information may differ for your surfaces.

Your question wasn't there? No problem! Just contact our support team. We'll definitely find an answer to your question!