Frequently asked questions about the Turbo green algae remover

1. How is the zerogreen® Green Growth Remover Turbo used?
Our product is easy to use. All you need is suitable protective clothing to protect yourself from splashes and aerosols. The concentrate can be poured into a clean tool and diluted up to 1:10 depending on the degree of dirt. Spray the area to be cleaned generously with the solution and leave to work for at least 30 minutes. Then rinse the area thoroughly with water.
2. On which surfaces can the zerogreen® Green Growth Remover Turbo be used?
Our product is versatile. It can be used on concrete, natural stone, plaster, wood, plastic and many other surfaces. Application to raw metals or other sensitive surfaces is not recommended as this can cause corrosion. A test should always be carried out on an inconspicuous area to test the material for compatibility.
3. Can the zerogreen® Green Growth Remover Turbo be harmful to plants or animals?
Our Turbo green algae remover is powerful and should not be used directly on plants or living creatures. Please handle the product carefully and follow the instructions on the label. After the product has taken effect or the product has been neutralized, animals can enter the area again without restrictions.
4. How much product do I need for my area?
Our Turbo green algae remover is highly concentrated and can be diluted up to 1:10. Therefore, a small amount is enough to clean a large area of ​​up to 110m². The actual consumption depends on the desired mixing ratio. For further help, use our consumption calculator.
5. How quickly does the zerogreen® Green Growth Remover Turbo work?
The effectiveness of the zerogreen® Green Growth Remover Turbo can be seen immediately after application. However, for more stubborn stains or dirt, it may take longer and a repeat of the process or a longer exposure time may be necessary. The effect can also be increased by brushing.
6. Can the zerogreen® Green Growth Remover Turbo damage surfaces?
Our product is designed to effectively remove dirt without damaging surfaces. However, we always recommend testing an inconspicuous area before applying it to a large area, as there are materials that are not suitable for treatment with zerogreen®. For example, raw metals.
7. Can I use the zerogreen® Green Growth Remover Turbo in rainy weather?
For best results, we recommend applying the product in dry weather. The best time to use the green algae remover is between +5 degrees and +25 degrees Celsius.
8. When should I use zerogreen® Green Growth Remover Turbo?
Our Turbo green growth remover can be used whenever green growth, algae, fungi, etc. need to be removed quickly. The temperature during processing should not fall below +5 degrees Celsius. The optimal time of year for use is spring or autumn. However, it can generally be used all year round, provided the conditions are right.
9. Can I mix the zerogreen® Green Growth Remover Turbo with other cleaning products?
Our green algae remover should never be mixed with other cleaning agents, as this could release toxic gases. Be particularly careful with acids. Always make sure your tools are clean.
10. How long will my surface stay clean?
This depends on many factors such as the environment, the surface, weather conditions, etc. As a rule, it can be said that surfaces stay clean for between 6-12 months before green growth forms again. The zerogreen® Green Growth Remover Turbo can be used prophylactically every six months to break down green growth as it forms. Alternatively, our zerogreen® Green Growth Remover with long-term protection can be used, which has a longer shelf life. This should be used prophylactically once a year. Please note that the information may differ for your surfaces.

Frequently asked questions about the green algae remover with long-term protection

1. What exactly is the zerogreen® green algae remover?

The zerogreen® Green Growth Remover is a highly concentrated cleaning agent specifically designed to remove green growth, algae and lichen from a wide variety of surfaces while providing long-lasting protection against new growth.

2. How is the zerogreen® green algae remover used?

The green algae remover can be diluted with water in a certain ratio (1:10) and then applied to the affected area with a pressure sprayer (or similar). It should be left to work for at least 24 hours and should ideally be protected from precipitation during this time.

3. On which surfaces can I use the zerogreen® green algae remover?

The zerogreen® green algae remover is versatile and suitable for concrete, natural stone, plaster, wood, plastic and many other surfaces. It is not recommended to use it on raw metals or other sensitive surfaces. A test should always be carried out on an inconspicuous area.

4. Is the zerogreen® green algae remover safe for my plants and pets?

The green algae remover is biodegradable and free of acid and chlorine, making it an environmentally friendly cleaning option. However, direct contact with plants or animals should be avoided. If the green algae remover has dried on the surface, the area can be walked on without any problems by pets.

5. At what time of year should the green algae remover be used?

Spring and autumn are the best times to use green algae removers. Nevertheless, our green algae remover with long-term protection can be used all year round, provided the conditions are right. The temperature for use should be at least +5 degrees Celsius.

6. Do I need to use a high-pressure cleaner before using the zerogreen® green algae remover?

No, high-pressure cleaning is not necessary. The zerogreen® green algae remover was specially developed to enable effective cleaning without high pressure and thus avoid damage to surfaces. However, coarse debris such as leaves, coarse moss and other items should be removed before use. Alternatively, our green algae remover with long-term protection can also be used after (professional) high-pressure cleaning in order to maintain the result in the long term.

7. Can I use the zerogreen® green algae remover in rainy weather?

Our zerogreen® green algae remover should not be used in rainy weather. After application, the area should be protected from rain for 24 hours. Ideally, the application should be carried out on a rain-free day.

8. How much area can I clean with one bottle of zerogreen® green algae remover?

One bottle of zerogreen® green algae remover can clean an area of ​​up to 110m² when diluted in a ratio of 1:10. Our green algae remover can also be used undiluted for very heavy soiling. Consumption with a pressure sprayer is around 0.1l per square meter. These calculations are based on real experience from real users.

9. How long do I have to wait to see results?

The visible effect can vary depending on the level of dirt and the dosage chosen. With light dirt, you can see results after a short time, while with more severe dirt, a little patience is required. For example: Light green deposits usually disappear after 1-3 days, lichen and heavy dirt may not disappear until 6-12 months.

10. How long will my surface stay clean?

This depends on several factors such as weather, environment, subsurface, etc. In general, it can be said that surfaces remain clean for between 12-18 months before the first green deposits form again. The zerogreen® green deposit remover with long-term protection can be used annually as a preventative measure to effectively prevent the formation of green deposits. Please note that the information may vary for your surfaces.


Your question wasn't there? No problem! Just contact our support team. We'll definitely find an answer to your question!