Frequently asked questions about zerogreen® Green Growth Remover Turbo
1. How is the zerogreen® Green Growth Remover Turbo used?
Our product is easy to use. All you need is suitable protective clothing to protect yourself from splashes and aerosols. The concentrate can be poured into a clean tool and diluted up to 1:10 depending on the degree of dirt. Spray the area to be cleaned generously with the solution and leave to work for at least 30 minutes. Then rinse the area thoroughly with water.
2. On which surfaces can the zerogreen® Green Growth Remover Turbo be used?
Our product is versatile. It can be used on concrete, natural stone, plaster, wood, plastic and many other surfaces. Application to raw metals or other sensitive surfaces is not recommended as this can cause corrosion. A test should always be carried out on an inconspicuous area to test the material for compatibility.
3. Can the zerogreen® Green Growth Remover Turbo be harmful to plants or animals?
Our Turbo green algae remover is powerful and should not be used directly on plants or living creatures. Please handle the product carefully and follow the instructions on the label. After the product has taken effect or the product has been neutralized, animals can enter the area again without restrictions.
4. How much product do I need for my area?
Our Turbo green algae remover is highly concentrated and can be diluted up to 1:10. Therefore, a small amount is enough to clean a large area of up to 110m². The actual consumption depends on the desired mixing ratio. For further help, use our consumption calculator.
5. How quickly does the zerogreen® Green Growth Remover Turbo work?
The effectiveness of the zerogreen® Green Growth Remover Turbo can be seen immediately after application. However, for more stubborn stains or dirt, it may take longer and a repeat of the process or a longer exposure time may be necessary. The effect can also be increased by brushing.
6. Can the zerogreen® Green Growth Remover Turbo damage surfaces?
Our product is designed to effectively remove dirt without damaging surfaces. However, we always recommend testing an inconspicuous area before applying it to a large area, as there are materials that are not suitable for treatment with zerogreen®. For example, raw metals.
7. Can I use the zerogreen® Green Growth Remover Turbo in rainy weather?
For best results, we recommend applying the product in dry weather. The best time to use the green algae remover is between +5 degrees and +25 degrees Celsius.
8. When should I use zerogreen® Green Growth Remover Turbo?
Our Turbo green growth remover can be used whenever green growth, algae, fungi, etc. need to be removed quickly. The temperature during processing should not fall below +5 degrees Celsius. The optimal time of year for use is spring or autumn. However, it can generally be used all year round, provided the conditions are right.
9. Can I mix the zerogreen® Green Growth Remover Turbo with other cleaning products?
Our green algae remover should never be mixed with other cleaning agents, as this could release toxic gases. Be particularly careful with acids. Always make sure your tools are clean.
10. How long will my surface stay clean?
This depends on many factors such as the environment, the surface, weather conditions, etc. As a rule, it can be said that surfaces stay clean for between 6-12 months before green growth forms again. The zerogreen® Green Growth Remover Turbo can be used prophylactically every six months to break down green growth as it forms. Alternatively, our zerogreen® Green Growth Remover with long-term protection can be used, which has a longer shelf life. This should be used prophylactically once a year. Please note that the information may differ for your surfaces.
Frequently asked questions about zerogreen® stone paint
1. How do I apply the zerogreen ® stone paint?
The application is simple and does not require any special expertise. You just need to clean the surface thoroughly, stir the paint well and then apply it evenly. A paint roller and brush, as well as airless sprayers, are suitable for this.
2. How long does it take for the paint to dry?
Our stone paint dries very quickly. You can usually walk on your newly designed surfaces after about 2-4 hours. However, the exact drying time can vary depending on weather conditions and temperature. To be on the safe side, we recommend not walking on/protecting the area for 24 hours.
3. How long does the color last?
The durability of our stone paint varies greatly depending on weather conditions and wear and tear, as well as the type of surface and substrate. It usually lasts up to 5 years before it may need to be reapplied. However, it can also last longer. For example: On palisades or edge areas, it naturally lasts longer than on areas with a lot of car traffic. Our stone paint can always be reworked!
4. Can I use the paint on other materials?
The zerogreen ® stone paint has been specially developed for paving stones and concrete surfaces. For other materials, we recommend that you first create a small test area to see how the material reacts to the paint.
5. How many square meters can I paint with one container of zerogreen ® stone paint?
One container is enough for around 20 square meters. However, the exact range can vary depending on the absorbency and condition of the surface. You can use our consumption calculator to help you.
6. Is zerogreen ® stone paint environmentally friendly?
Yes, our stone paint is water-based and sustainable. Our stone paint was specially manufactured for the purpose of coating floors outdoors, so it is vapor-permeable and does not seal the building material. In addition, you can save valuable resources by using zerogreen® stone paint, as no new building needs to be constructed.
7. Can I clean the colored surface with a high-pressure cleaner?
Intensive high-pressure cleaning should be avoided, even if the stone color can usually withstand household high-pressure cleaners, the durability of the stone color will be affected. We recommend aftercare with zerogreen® green algae remover with long-term protection or zerogreen® green algae remover turbo.
8. Will my surface look painted over after application?
No, the stone color takes on the surface structure of the stones and does not form an unnatural layer on the stones. Take a look at our reference images.
9. Can I also use zerogreen ® stone paint indoors?
The zerogreen ® stone paint was developed primarily for outdoor use. It can be used indoors, but we recommend testing the surface in an inconspicuous area first.
10. Will the stone colour wear off faster if there is car traffic?
Yes, absolutely. Our stone paint is very robust, but we do not recommend it for areas subject to exceptionally heavy traffic, such as parking lots or areas with a lot of traffic. However, our paint can generally be used for private driveways without any concerns. If in doubt, a test should always be carried out on an area subject to heavy traffic.
Your question wasn't there? No problem! Just contact our support team. We'll definitely find an answer to your question!