Frequently asked questions zerogreen® Nano impregnation
1. Can I use zerogreen ® Nano impregnation on any surface?
Our impregnation is perfect for materials such as concrete, stone, clinker, plaster and more. It can be used on terraces, paths, facades, roofs and other surfaces. The impregnation is not suitable for metals, glass, paint, textiles, etc. A test should always be carried out on an inconspicuous area beforehand.
2. How do I apply the zerogreen ® Nano impregnation?
The impregnation can be applied with a pressure sprayer, roller, brush, etc. Make sure that it is evenly distributed and that all areas are covered. The formation of puddles must always be avoided.
3. How long does the protection of the zerogreen ® Nano impregnation last?
The duration of protection provided by zerogreen ® Nano impregnation can vary depending on use, environmental influences, type of substrate and weather conditions. However, under optimal conditions and with appropriate care, the protection can last up to 5 years. It is recommended to check the condition regularly and carry out a follow-up treatment if necessary to ensure the best protection and longevity.
4. How do I dilute the zerogreen ® Nano impregnation?
Depending on the desired intensity, the impregnation can be diluted with water in a ratio of up to 1:10, but not higher than 1:8.
5. How much area can I treat with one liter of zerogreen ® Nano Impregnation?
One liter of the concentrate, diluted in a ratio of 1:10, is enough for about 100m². The range can vary greatly depending on the absorbency of the substrate (for example, clinker or other highly absorbent substrates).
6. How long does the impregnation need to dry?
The impregnation should dry for approximately 24 hours. The exact drying time varies depending on the ambient temperature and humidity. However, it is important to protect the impregnation from precipitation or moisture for at least 24 hours.
7. What do I do if puddles form on the treated area?
The formation of puddles should be avoided at all costs, as this can affect the appearance of your surface. When applying the product, care should be taken to ensure that the impregnation is evenly distributed. Always test a sample in an inconspicuous place.
8. Is the zerogreen ® Nano impregnation environmentally friendly?
Yes, our nano impregnation is free of harmful chemicals and does not contain any aggressive solvents.
9. Will my stone surface become slippery after impregnation?
Don't worry, the zerogreen ® Nano impregnation preserves the original texture of your flooring and does not make it slippery. It penetrates deep into the stone without changing its surface structure.
10. What is the benefit of impregnation on stones / facades / roofs?
The zerogreen ® nano impregnation protects stones, facades and roofs by forming an invisible barrier that repels dirt and moisture. It preserves the natural appearance, increases the durability of the materials and makes cleaning and maintenance easier.
Frequently asked questions zerogreen® Green Growth Remover Turbo
1. How is the zerogreen® Green Growth Remover Turbo used?
Our product is easy to use. All you need is suitable protective clothing to protect yourself from splashes and aerosols. The concentrate can be poured into a clean tool and diluted up to 1:10 depending on the degree of dirt. Spray the area to be cleaned generously with the solution and allow it to take effect for at least 30 minutes. Then rinse the area thoroughly with water.
2. On which surfaces can the zerogreen® Green Growth Remover Turbo be used?
Our product is versatile. It can be used on concrete, natural stone, plaster, wood, plastic and many other surfaces. Application to raw metals or other sensitive surfaces is not recommended as this can cause corrosion. A test should always be carried out on an inconspicuous area to test the material for compatibility.
3. Can the zerogreen® Green Growth Remover Turbo be harmful to plants or animals?
Our Turbo green algae remover is powerful and should not be used directly on plants or living creatures. Please handle the product carefully and follow the instructions on the label. After the product has taken effect or the product has been neutralized, animals can enter the area again without restrictions.
4. How much product do I need for my area?
Our Turbo green algae remover is highly concentrated and can be diluted up to 1:10. Therefore, a small amount is enough to clean a large area of up to 110m². The actual consumption depends on the desired mixing ratio. For further help, use our consumption calculator.
5. How quickly does the zerogreen® Green Growth Remover Turbo work?
The effectiveness of the zerogreen® Green Growth Remover Turbo can be seen immediately after application. However, for more stubborn stains or dirt, it may take longer and a repeat of the process or a longer exposure time may be necessary. The effect can also be increased by brushing.
6. Can the zerogreen® Green Growth Remover Turbo damage surfaces?
Our product is designed to effectively remove dirt without damaging surfaces. However, we always recommend testing an inconspicuous area before applying it to a large area, as there are materials that are not suitable for treatment with zerogreen®. For example, raw metals.
7. Can I use the zerogreen® Green Growth Remover Turbo in rainy weather?
For best results, we recommend applying the product in dry weather. The best time to use the green algae remover is between +5 degrees and +25 degrees Celsius.
8. When should I use zerogreen® Green Growth Remover Turbo?
Our Turbo green growth remover can be used whenever green growth, algae, fungi, etc. need to be removed quickly. The temperature during processing should not fall below +5 degrees Celsius. The optimal time of year for use is spring or autumn. However, it can generally be used all year round, provided the conditions are right.
9. Can I mix the zerogreen® Green Growth Remover Turbo with other cleaning products?
Our green algae remover should never be mixed with other cleaning agents, as this could release toxic gases. Be particularly careful with acids. Always make sure your tools are clean.
10. How long will my surface stay clean?
This depends on many factors such as the environment, the surface, weather conditions, etc. As a rule, it can be said that surfaces stay clean for between 6-12 months before green growth forms again. The zerogreen® Green Growth Remover Turbo can be used prophylactically every six months to break down green growth as it forms. Alternatively, our zerogreen® Green Growth Remover with long-term protection can be used, which has a longer shelf life. This should be used prophylactically once a year. Please note that the information may differ for your surfaces.
Your question wasn't there? No problem! Just contact our support team. We'll definitely find an answer to your question!