The application is simple and does not require any special expertise. You just need to clean the surface thoroughly, stir the paint well and then apply it evenly. A paint roller and brush, as well as airless sprayers, are suitable for this.

Our stone paint dries very quickly. You can usually walk on your newly designed surfaces after about 2-4 hours. However, the exact drying time can vary depending on weather conditions and temperature. To be on the safe side, we recommend not walking on/protecting the area for 24 hours.

The durability of our stone paint varies greatly depending on weather conditions and wear and tear, as well as the type of surface and substrate. It usually lasts up to 5 years before it may need to be reapplied. However, it can also last longer. For example: On palisades or edge areas, it naturally lasts longer than on areas with a lot of car traffic. Our stone paint can always be reworked!

The zerogreen ^® stone paint has been specially developed for paving stones and concrete surfaces. For other materials, we recommend that you first create a small test area to see how the material reacts to the paint.

One container is enough for around 20 square meters. However, the exact range can vary depending on the absorbency and condition of the surface. You can use our consumption calculator to help you.

Yes, our stone paint is water-based and sustainable. Our stone paint was specially manufactured for the purpose of coating floors outdoors, so it is vapor-permeable and does not seal the building material. In addition, you can save valuable resources by using zerogreen® stone paint, as no new building needs to be constructed.

Intensive high-pressure cleaning should be avoided, even if the stone color can usually withstand household high-pressure cleaners, the durability of the stone color will be affected. We recommend aftercare with zerogreen® green algae remover with long-term protection or zerogreen® green algae remover turbo.

No, the stone color takes on the surface structure of the stones and does not form an unnatural layer on the stones. Take a look at our reference images.

The zerogreen ^® stone paint was developed primarily for outdoor use. It can be used indoors, but we recommend testing the surface in an inconspicuous area first.

Yes, absolutely. Our stone paint is very robust, but we do not recommend it for areas subject to exceptionally heavy traffic, such as parking lots or areas with a lot of traffic. However, our paint can generally be used for private driveways without any concerns. If in doubt, a test should always be carried out on an area subject to heavy traffic.